Mount Rushmore, Measurement of

views updated May 08 2018

Mount Rushmore, Measurement of


The Mount Rushmore National Memorial is one of the world's largest sculptural and engineering projects. Sculptor-designer John Gutzon de la Mothe Borglum (18671941) was contracted in 1927 to carve the solid-granite memorial. Borglum conceived the model figures, brought them to life within the mountain's stone, and directed 400 artisans until his death in 1941. Later that year, his son Lincoln finished the project, which had spanned 14 years (6.5 years of actual carving and 8.5 years of delays due to lack of money and bad weather) at a cost of $1 million.

Mount Rushmore is considered a priceless U.S. treasure, memorializing the first 150 years of the country's struggle for independence and the birth of the republic as represented by George Washington; the idea of representative government in an expanding nation as envisioned by Thomas Jefferson; the preservation of the union of states and the equality for all citizens as championed by Abraham Lincoln; and the twentieth-century developmental role of the United States in world affairs and economy as promoted by Theodore Roosevelt.

Mount Rushmore would not have been possible without Borglum's earlier carving experience of Confederate leaders on Stone Mountain. In the Rushmore project, Borglum employed few conventional sculpturing methods

in what was a unique engineering accomplishment. Borglum knew that he needed a cliff 400- to 500-feet in height; it had to lay at an angle so the main wall would face toward the sun; and there had to be sufficient amounts of even, unblemished stone to provide an acre of upright surface.

The presidential models were based on descriptions, paintings, photographs, life masks, and Borglum's interpretations. Initially, Borglum climbed down the mountain to locate Washington's nose line, eyebrows, and chin, marking each with red paint. From these points, he studied and mathematically calculated the scale necessary for the first head. Realizing the importance of models at the worksite, Borglum displayed a five-foot mask of each figure as a guide for the workers. However, Borglum did not simply transpose the models directly onto the granite; rather he fine-tuned the heads into artwork. In fact, Borglum realized that to transfer accurately his models into finished heads, he needed mathematical and engineering concepts. What he had to be, besides a sculptor, was an explosives expert, a geologist, a miner, an engineer, and a mathematician.

Scale in Mount Rushmore

Borglum constructed a "pointing machine" that enabled the transfer of mathematical dimensions of his models onto the mountain with a simple ratio of 1:12. That is, 1 inch on the model equaled 12 inches (1 foot) on the mountain. Each model was measured the same way (as shown in the diagram below). A metal shaft (1) was placed upright at the center of the top of the head, the "master point." A protractor (2), in degrees, was attached at the shaft's base. A horizontal bar (3) was placed on the protractor's central axis and pivoted to measure right and left angles from the centerline of the model's face. A weighted plumb-bob (4) was dropped from the horizontal bar and slid back and forth to measure the horizontal distance from the master point to the position on the bar where the plumb-bob touched a head-point being measured. The plumb-bob was also raised or lowered to measure the vertical distance from the bar on the top of the head to that particular head-point.

Each reference point on the model received three measurements: (a) a rotational (angular) measurement along the protractor, (b) a horizontal distance (linear) measurement along the bar, and (c) a vertical distance (linear) measurement along the plumb-bob. The two linear measurements for each reference point were multiplied by 12, with the angular measurement remaining constant, and then transferred to the mountain with a large-scale "Rushmore pointing machine."

This machine was secured at the mountaintop with a vertical mast, horizontal steel boom, and steel-slab protractor. Borglum used it in this way: If the model measure from the top of Washington's wig to his nose measured 20 inches, that length was multiplied by 12 to find that his nose on Rushmore measured 240 inches, or 20 feet, from the top of his head. However, the angular measurement remains the same between the model and the mountain since the definition of an angle is the ratio of a circle's arc length (s ) and its radius (r ), and that ratio remains constant for both model and mountain. That is, if the model ratio of arc length to radius is , then the mountain ratio of arc length to radius is , and the 12s cancel each other out. This system of transferring measurements from small to large pointing machines proved to be so effective that it was the only necessary measuring system.

Carving Mount Rushmore

An oval-shaped volume was first dynamited to remove sheets of excess stone for each roughened head. This "egg" was divided into three sectionsone at the eyebrow line, another at the nose end, and a third at the chin end. Rough shaping of heads began as the surface was removed with smaller charges of dynamite until good carving stone was reached. After a reference point, such as a nose tip, was located, lines of holes were drilled from 2 to 6 feet deep. Excess rock was removed with mini-charges of dynamite (sometimes only a half ounce) inserted into the holes, sometimes within inches of the finished surface.

Drillers suspended over the mountain's face by cables in swing seats then shaped the features. Pneumatic drills punctured the surface with a honeycomb series of holes at intervals of about 3 inches. The holes' depths ultimately shaped the finished "skin." The remaining rock was later chiseled with a drill, or a hammer and wedging tool, to the finished depth. Finally, the surface was smoothed with pneumatic hammers in a process called bumping to create a white surface as smooth as a concrete sidewalk. Measuring-drilling-blasting-drilling-wedging-bumping became the work cycle as 450,000 tons of rocks were removed.

The work on Mount Rushmore was Borglum's way to preserve a symbol of a great national ideal. Borglum never felt anyone (including himself) was endowed at birth with superior talents. His ability as a successful artist was due to trained observation, hard work, and the ability to use engineering and mathematical methods to produce his artistic creations, including the impressive Mount Rushmore.

see also Ratio, Rate and Proportion; Scale Drawings and Models.

William Arthur Atkins and

Philip Edward Koth

Bibliography

Casey, Robert J., and Mary Borglum. Give the Man Room: The Story of Gutzon Borglum. Indianapolis: Bobbs-Merrill, 1952.

Fite, Gilbert C. Mount Rushmore. Norman, OK: University of Oklahoma Press, 1952.

Shaff, Howard, and Audrey Karl Shaff. Six Wars at a Time: The Life and Times of Gutzon Borglum, Sculptor of Mount Rushmore. Sioux Falls, SD: Center for Western Studies, Augustana College, 1985.

Smith, Rex Allen. The Carving of Mount Rushmore. New York: Abbeville Press, 1985.

Internet Resources

"The Borglum Era 19161925" and "Gutzon Borglum." The University of Virginia: American Studies. <http://xroads.virginia.edu/~UG97/stone/timeln2.html> and <http://xroads.virginia.edu/~UG97/stone/gutzon.html>.

"Mount Rushmore." South Dakota travelsd.com. South Dakota Department of Tourism. <http://www.travelsd.com/parks/rushmore/index.htm>.

"Mount Rushmore History: The Making of Mount Rushmore." American Park Network. <http://www.americanparknetwork.com/parkinfo/ru/history/carve.html>.


MOUNT RUSHMORE'S NEIGHBOR

Another monumental sculpture is taking shape in the hard rock of the Black Hills. Honoring Native American Chief Crazy Horse, the work depicts the warrior on horseback. The sculpture was begun in 1947 by Korczak Ziolkowski, who had assisted Borglum on Mount Rushmore. A celebration was held in 1998 when the chief's face (measuring nine stories high) was completed.

When the entire work is finished, the tribute is slated to be the largest sculpture in the world, standing more than 560-feet high and 640-feet long. Ziolkowski, who died in 1982, took steps to ensure that his vision could be completed by other carvers, leaving detailed plans and specifications for others to follow.


Mount Rushmore

views updated May 18 2018

Mount Rushmore

America, "the land of the free and the brave," has many national monuments. Possibly none, though, so unabashedly celebrates American expansionism as the piece of sculpture 23 miles southwest of Rapid City, South Dakota. Completed in stages during the 1920s and 1930s, the Mount Rushmore National Memorial, which is visited by 40 million tourists annually, celebrates the spirit of America through huge carvings of the faces of four presidents: George Washington, Thomas Jefferson, Abraham Lincoln, and Theodore Roosevelt. While the memorial was intended simply as a tribute to these great leaders, changes in the cultural climate have begun to alter its interpretation. Particularly through the influence of Native American groups, some Americans have begun to question just what kind of symbol this is for their nation. Such is the price for any landscape that attempts to serve as sacred for a number of different constituents.

As a sculpture, Gutzon Borglum's Mount Rushmore is one of the world's largest. It is certainly one of the world's most impressive works of man: it erupts out of the Black Hills and surrounding mountains roll off endlessly into the horizon; the granite faces tower 5,500 feet above sea level, seeming to peer out over the nation which they helped to foster. Prior to the project, Borglum had begun ill-fated work on the Stone Mountain Confederate Memorial in Georgia. Without finishing that project, Borglum moved on to South Dakota where his work attracted national attention. President Calvin Coolidge was so impressed with the project that he arranged federal funding to support it. At the project's dedication in 1927, Coolidge stated that he believed the project was "decidedly American in its conception, magnitude, and meaning. It is altogether worthy of our country."

The project proceeded briskly, though this is a relative term when reducing the face of a mountain to sculpture. After three years of blasting, chiseling, and drilling, George Washington's head emerged. Franklin D. Roosevelt was present at the dedication of the Thomas Jefferson figure in 1936. Abraham Lincoln's head was dedicated in 1937 and Theodore Roosevelt's in 1939. Gutzon Borglum died during the final years of his shrine's construction. The project was never truly completed; in fact, the artist intended another giant carving—a memorial to the Sioux Indians—to be located in the Pine Ridge country of Nebraska. Instead, his heirs have taken up the project on a nearby mountain in South Dakota. The creation of the Crazy Horse sculpture continues to unfold, but already attracts thousands of visitors.

Mount Rushmore has proved a lasting image for the nation since 1939. The exact meaning, however, appears to be different for each viewer. Sacred landscapes are defined by ongoing contestation, or debate, over meaning. The situation is particularly acute in the Black Hills where Sioux and American settlers have been in armed or legal battle for 150 years. To some visitors, as with Coolidge, the towering sculpture in the Black Hills signifies the power and fortitude of the American nation as it followed "Manifest Destiny" westward and then became a global power unlike any other civilization. As Sioux and other Native Americans watch millions of tourists arrive at Mount Rushmore each year, they cannot help but view the creation and celebration as sacrilege. As one Sioux bitterly observed, "This is what conquering means. They could have just carved this mountain into a huge cavalry boot standing on a dead Indian."

—Brian Black

Further Reading:

Lame Deer, John, and Richard Erdoes. Lame Deer: Seeker of Visions. New York, Simon and Schuster, 1978.

Mathiessen, Peter. In the Spirit of Crazy Horse. New York, Viking, 1983.

Worster, Donald. Under Western Skies. New York, Oxford University Press, 1992.

Mount Rushmore

views updated May 23 2018

Mount Rushmore

Doane Robinson (1856–1946), the superintendent of the South Dakota State Historical Society, had a vision. He wanted to see a massive mountain memorial carved from stone, one so huge that it would make the state a tourist attraction. In 1923, he began campaigning for this memorial, sending letters and giving presentations to various special interest groups. Some agreed that such a memorial would attract visitors, who would in turn spend money in the state. Others thought the idea was ridiculous.

Robinson turned to U.S. senator Peter Norbeck (1870–1936) of South Dakota, who had the respect not only of his peers in the Senate, but also the rural farmers and ranchers of South Dakota who voted him into the Senate. Norbeck liked Robinson's idea and urged him to find a sculptor who could handle such a major project.

Robinson wrote to sculptor Gutzon Borglum (1867–1941), one of America's foremost artists, in August 1924. Borglum accepted Robinson's offer and arrived in South Dakota the following month. The sculptor immediately informed Robinson and Norbeck that he would not immortalize regional heroes because he believed a commission of this scope should aspire to memorialize people more relevant to American

history. Together, the three men selected four U.S. presidents: George Washington (1732–1799; served 1789–97), Thomas Jefferson (1743–1826; served 1801–9), Abraham Lincoln (1809–1865; served 1861–65), and Theodore Roosevelt (1858–1919; served 1901–9). In the trio's estimation, these four figures best represented the birth and development of the nation as well as the pursuit of individual liberty.

The long wait

Borglum began searching for the site to carve his sculpture. After dismissing some sites as inappropriate, Borglum and his party climbed Harney Peak, the highest point between the Rocky Mountains and the Swiss Alps. It was there that Harney declared “American history shall march along that skyline.” The cliff he had chosen was called Mount Rushmore. Made of granite and almost without fracture, the cliff had southeastern exposure, which would give it direct sunlight for most of the day.

Congress passed federal legislation allowing a mountain carving in Harney National Forest, and a similar bill was passed on the state level in 1925. More funding was needed, however, and it was becoming increasingly difficult to obtain. Months passed as environmentalists worried that the project would deface the mountainside and others wondered publicly how God's masterpiece of nature could be improved upon. As 1926 dawned, most citizens in South Dakota dismissed the idea of the sculpture altogether.

President Calvin Coolidge (1872–1933; served 1923–29) chose the Black Hills of South Dakota as his summer vacation spot in the spring of 1927. The three-week break in the mountains gave Borglum and Norbeck time to convince the president to formally dedicate Mount Rushmore. On August 10, Coolidge referred to the coming sculpture as a national shrine and pledged to use federal dollars to support the endeavor.

Labor of love

Borglum hired nearly four hundred local workers to help with the project. Over the course of on-again, off-again work from 1927 to 1941, these men built roads, generated power, set dynamite charges, performed delicate finishing work, and provided a variety of services. Those workers discharging dynamite were among the most skilled, and the majority of them were miners. Ninety percent of the 450,000 tons of granite removed from Mount Rushmore were taken out with dynamite. Remarkably, no one died on the work site, and only a few men suffered injuries.

Borglum paid his dynamite employees $1.25 an hour, which was more than they made in the mines. The crew had to deal with extended layoffs, however, due to lack of funds and harsh weather.

Borglum died in March 1941, just seven months before completion of the sculpture. His son spent those seven months putting the finishing touches on the masterpiece, and on October 31, 1941, he made the last refinement. Mount Rushmore on that day looked as it does in the twenty-first century.

Lasting legacy

Mount Rushmore is the biggest work of art in the world. Each face measures 60 feet tall, and the entire carving covers nearly 1,300 acres. The sculpture cost just under $990,000. Thomas Jefferson originally appeared on Washington's right, but when the granite cracked, he was blasted off the mountain and rebuilt to Washington's left. According to records kept by the National Park Service, Mount Rushmore attracts around two millions tourists each year.

Mount Rushmore

views updated May 11 2018

MOUNT RUSHMORE

MOUNT RUSHMORE is the world's largest sculpture and foremost mountain carving. Located about twenty-five miles southwest of Rapid City, South Dakota, in the Black Hills National Forest, the memorial commemorates the foundation, preservation, and expansion of the United States and features the faces of four of the nation's most famous presidents, George Washington, Thomas Jefferson, Abraham Lincoln, and Theodore Roosevelt. Each of the sculpted faces is over sixty feet high. Carved out of a granite cliff atop the 5,725-foot-high mountain, the memorial is visible from miles away.

In 1923 the South Dakota state historian Doane Robinson initially proposed a memorial of giant sculptures in the Black Hills as a way to commemorate heroes of the old West, like the explorers Meriwether Lewis and William Clark and the Sioux Indian leader Red Cloud. Robinson understood that, in the era of the beginnings of widespread automobile ownership and the development of a vacation industry in America, such a monument would attract tourists and bring extra revenue to the region. He contacted the sculptor Gutzon Borglum, who was then famous for his work on a Confederate memorial at Stone Mountain in Georgia. Borglum traveled to South Dakota in 1924 and endorsed the project but introduced


a fundamental change in its scope. Rather than a western memorial of regional interest, the fiercely patriotic Borglum envisioned a memorial national in character that would appeal to all Americans. In fact, Borglum suggested the memorial feature carvings of the four presidents. After surveying the Black Hills for a suitable cliff in 1925, Borglum chose Mount Rushmore, and carving began in 1927.

Fourteen years later, in October 1941, work at Mount Rushmore finally came to an end, though less than half that time was actually spent on carving and sculpting the monument. Lack of money for the project was a constant problem, which often shut down operations for whole seasons at a time. The fact that Mount Rushmore was meant as a national memorial did help, however. South Dakota senator Peter Norbeck and Borglum himself often successfully lobbied Congress for funds, even during the Great Depression. Of the nearly $1 million total cost of carving Mount Rushmore, more than $800,000 came from federal sources.

In 1933, President Franklin Roosevelt placed the project under the jurisdiction of the National Park Service, which continued to administer the memorial. "The Shrine to Democracy," as Mount Rushmore National Memorial is often called, is visited by more than 2.6 million sightseers annually, fulfilling both Robinson's dream of a historical tourist attraction in the Black Hills and Borglum's vision of a lasting monument to America's majesty.

BIBLIOGRAPHY

Price, Willadene. Gutzon Borglum, Artist and Patriot. Chicago: Rand, 1961.

Smith, Rex Alan. The Carving of Mount Rushmore. New York: Abbeville Press, 1985.

NoahGelfand

See alsoArt: Sculpture ; National Park System .

Mount Rushmore

views updated May 18 2018

Mount Rushmore Mountain in the Black Hills, sw South Dakota, USA. From 1927 Gutzon Borglum carved out the colossal busts of US Presidents Washington, Jefferson, Lincoln, and Theodore Roosevelt from the granite face of Mount Rushmore. After Gutzon's death in 1941, his son completed the work. Area: 5sq km (2sq mi).

Rushmore, Mount

views updated May 17 2018

Rushmore, Mount a mountain in the Black Hills of South Dakota, noted for its giant busts of four US Presidents— George Washington, Thomas Jefferson, Abraham Lincoln, and Theodore Roosevelt—carved (1927–41) under the direction of the sculptor Gutzon Borglum (1867–1941).

More From encyclopedia.com

About this article

Mount Rushmore National Memorial

All Sources -
Updated Aug 13 2018 About encyclopedia.com content Print Topic

You Might Also Like

    NEARBY TERMS

    Mount Rushmore National Memorial